“How to book” the boat:

Reserving the date:

Choose the boat you want to rent, find available date and reserve the date by contacting us by phone and a) paying 100$ in person b) zelling over phone.

When to arrive

  • Arrive at least 30 minutes before your scheduled departure time.
  • Allow time for paperwork, safety briefing, and loading your gear.

Check-in & paperwork

  • Present a valid government-issued photo ID and the credit card used for the booking.
  • Review and sign:
    • Rental agreement
    • Liability waiver
    • Damage and fuel policy
  • Confirm your rental period (start/end time) and late-return fees.

Damage inspection (walk-around)

With a staff member, walk around the boat and:

  • Inspect the hull, propeller, engine cover, rails, seats, and windshield for any existing damage.
  • Check that cleats, ladders, and bimini top (if equipped) work properly.
  • Note and photograph any scratches, dents, tears, or cracks before departure.
  • Make sure all existing damage is documented in writing on the checkout form.

Required safety equipment

Verify that the following are on board and easily accessible:

  • USCG-approved life jackets (PFDs) for every person, properly sized (adults, children, infants).
  • Throwable floatation device (Type IV).
  • Fire extinguisher (check that gauge is in the green zone).
  • Sound-producing device (horn or whistle).
  • Visual distress signals, if required locally (flares or approved alternatives).
  • Anchor with adequate line, dock lines, and fenders.
  • Navigation lights operational (for rentals that may be out near dusk).

If anything is missing, inform staff before leaving the dock.

Area and conditions briefing

Ask staff to explain:

  • The approved operating area (and show it on a map).
  • No-go zones: shallow areas, rocks, sandbars, swim zones, restricted areas.
  • Local speed limits and no-wake zones.
  • Any current hazards (low water levels, debris, strong currents, etc.).

Boat controls overview

Have staff show you:

  • Ignition: how to start/stop the engine and use the safety lanyard/kill switch.
  • Throttle and gear: forward, neutral, reverse, and how to shift smoothly.
  • Steering wheel response and turning radius.
  • Trim control (if equipped): basic explanation of when to trim up/down.
  • Bilge pump, horn, lights, and any other switches.
  • Fuel gauge: starting fuel level and refueling policy.

Communication & emergencies

  • Confirm emergency contact numbers for the rental office and local emergency services.
  • Know what to do if:
    • The boat won’t start
    • You strike an object or run aground
    • Someone is injured or falls overboard

Step 2: Boat Launch

Before starting the engine

  • Ensure everyone is seated and inside the rails (on pontoons) or securely seated (on runabouts).
  • Distribute weight evenly to keep the boat level.
  • Confirm dock lines and fenders are ready and that at least one person can help with departure.
  • Make sure all loose items (bags, coolers, phones) are secure.

Starting the engine

  1. Attach the safety lanyard/kill switch to the operator.
  2. Ensure the throttle is in neutral.
  3. Turn the ignition key or press the start button until the engine starts.
  4. Check that water is flowing from the engine’s cooling outlet (if visible).

Leaving the dock

  • Assign one person to handle lines:
    • Cast off or remove lines only when instructed by the operator.
  • Keep the engine at idle speed while still near the dock.
  • Slowly shift into forward or reverse, as needed, to ease away from the dock.
  • Maintain control with small steering inputs—avoid sudden throttle changes.

No-wake zone

  • Remain at idle / no-wake speed until you are well clear of the marina, docks, and swimmers.
  • Follow posted speed signs and directional markers when exiting the harbor or launch area.

Step 3: Boat Use (Underway Operation)

Operator responsibilities

  • The renter/operator is responsible for the safety of all passengers and for any damage caused.
  • The operator must remain soberno operating under the influence of alcohol or drugs.
  • Keep at least one qualified backup adult who understands basic controls in case the operator is incapacitated.

Safe speed and visibility

  • Adjust your speed based on:
    • Traffic: slow around other boats, swimmers, docks, and marinas.
    • Visibility: reduce speed in fog, rain, glare, or at dusk.
    • Water conditions: slow down in rough water or strong currents.
  • Never go faster than you can stop or maneuver safely.

Navigation basics

  • Stay in the marked channels when possible.
  • Give extra distance to:
    • Anglers (fishing boats)
    • Non-motorized craft (kayaks, paddleboards, sailboats)
    • Swim areas and beachfronts
  • Observe right-of-way rules where applicable (for example, generally:
    • Vessels being overtaken have the right of way.
    • Keep to starboard (right) side of channels where marked.
    • Reduce wake around smaller and moored vessels.

Passenger safety while underway

  • Children and weak swimmers should wear life jackets at all times.
  • No one should sit on:
    • The bow outside of railings
    • The gunwales (sides of the boat)
    • The swim platform while underway
  • Keep hands and feet inside the vessel and away from the propeller area.
  • Instruct passengers to hold on when turning or crossing wakes.

Wake and shoreline courtesy

  • Slow down well before your wake reaches:
    • Docks and marinas
    • Mooring fields
    • Narrow channels and shorelines
  • Avoid creating large wakes near:
    • Paddlers, small fishing boats, and anchored vessels
    • Eroding shorelines or fragile habitats

Stopping and anchoring

  • Choose a safe depth and bottom type (sand or mud preferred, avoid rocks and vegetation).
  • Lower the anchor straight down, then slowly back away to set it, paying out enough scope (line).
  • Turn off the engine once anchored and confirm the boat is not dragging.

Step 4: Boat Docking or Beaching

General safety

  • Reduce speed to idle well in advance.
  • Never approach faster than you are willing to hit—you should be able to stop almost immediately.
  • Brief your passengers:
    • Only one or two helpers handle lines.
    • No one should jump to the dock; step carefully when close and stable.
    • Keep hands and feet away from pinch points between boat and dock.

Docking

  1. Plan your approach based on wind and current; ideally, approach into the wind or current for better control.
  2. Use short bursts of forward and reverse at idle to adjust position and speed.
  3. As you come alongside, have crew:
    • Use fenders between the boat and dock.
    • Step onto the dock carefully to secure bow and stern lines.
  4. Once lines are secure:
    • Shift to neutral, then turn off the engine.
    • Double-check that lines are snug and the boat is stable.

Beaching

  • Only beach where the rental company permits it.
  • Approach slowly, engine at idle; ensure the bottom is clear of rocks and obstacles.
  • Raise the engine/drive (trim up) as you get into shallow water to prevent damage (as instructed for your boat).
  • Once grounded gently, turn off the engine.
  • Use an anchor from the bow or stern lines to prevent the boat from drifting sideways or floating away.
  • When departing, push the boat into deeper water before lowering the drive and starting the engine.

Step 5: Boat Loading (Passengers & Gear)

Before boarding

  • Keep the boat secured to the dock with lines and fenders.
  • Turn engine off while boarding and loading.
  • Only board when the operator says it is safe.

Passenger loading

  • Allow passengers to board one at a time, stepping onto stable surfaces (not the gunwale or seat backs).
  • Distribute passengers evenly from front to back and side to side.
  • Do not exceed the maximum capacity posted on the capacity plate:
    • Maximum number of persons
    • Maximum weight (persons + gear)

Gear and coolers

  • Stow heavy items (coolers, bags) low and centered.
  • Keep walkways and exits clear of trip hazards.
  • Secure anything that might slide or blow away while underway.

Final checks before departure

  • Verify life jackets are on or within immediate reach, especially for children.
  • Confirm everyone knows:
    • Location of life jackets, fire extinguisher, and throwable device
    • How to use the ladder to get back on board after swimming
  • Confirm the operator is sober and ready.

Step 6: Boat Delivery (Return)

Timing and location

  • Return to the designated dock or marina by your scheduled return time.
  • Allow extra time for slow no-wake travel, docking, unloading, and the final inspection.

Before entering the marina

  • Stow any loose items and ensure passengers are seated.
  • Reduce speed to idle/no-wake upon entering marina or docking area.

Docking on return

  • Follow the same docking steps as in Step 4: slow, controlled approach, use of lines and fenders.
  • Once secured:
    • Turn the engine off and remove the key (if applicable).
    • Ensure the safety lanyard is removed.

Unloading passengers and gear

  • Have passengers disembark carefully, one at a time.
  • Remove all personal belongings, trash, and food from the boat.
  • Leave rental equipment (anchors, lines, fenders, safety gear) on board.

Post-trip inspection

With a staff member:

  • Inspect the boat again for new damage:
    • Hull, propeller, engine lower unit
    • Seats, upholstery, rails, and accessories
  • Review:
    • Any incidents (grounding, collisions, equipment issues) that occurred.
    • Fuel level and refueling charges according to the rental policy.
    • Overtime or late fees, if applicable.

Reporting issues

  • Immediately report:
    • Any mechanical problems you experienced.
    • Any accidents, near-misses, or injuries, even if minor.
  • Honest reporting helps staff keep the next renters safe and may affect how damage is assessed.

Step 7: __________________

(This space can be used by rental staff for additional, location-specific instructions such as local regulations, special hazards, or custom rules.)


If you’d like, I can next:

  • Condense this into shorter bullet-point checklists for each step, or
  • Adapt the wording specifically to your boat type (e.g., pontoon, center console, bowrider) and your lake/river setting.